How to master fiber opticslaser cutting machineHow to use it? When using a fiber laser cutting machine to process objects, it is necessary to master some skills in using the fiber laser cutting machine equipment in order to better utilize its effectiveness and maximize its work efficiency.

(1) Regularly check the steel strip to ensure it is tightened. Otherwise, if there is a problem with the operation, there may be people injured, and in severe cases, it can even cause death. The steel strip may seem like a small matter, but the problem is still quite serious.

(2) Check the straightness of the track and the verticality of the machine every six months, and promptly repair and debug any abnormalities found. If you haven't done this, the cutting effect may not be very good, the error will increase, and it will affect the quality of the cutting. This is more important and needs to be achieved.

(3) Use a vacuum cleaner once a week to remove dust and dirt from the machine, and close all electrical cabinets to prevent dust.

(4) Regularly clean each guide rail, remove dust and other debris, regularly wipe the normal gear rack of the equipment, add lubricating oil to ensure lubrication without debris. The guide rail needs to be cleaned and lubricated regularly, and even the motor needs to be cleaned and lubricated regularly. This way, the machine can move better, cut more accurately, and improve the quality of the products cut.

(5) The dual focal length laser cutting head is a vulnerable component on laser cutting machines, and long-term use can easily cause damage to the laser cutting head.

Regular inspection and maintenance are required. If there is any deformation or other form of appearance, then you should know that the laser cutting head is slightly damaged and needs to be replaced. Not replacing will affect the quality of cutting, increase costs, and some products may require secondary processing, reducing production efficiency. Laser cutting heads should be produced by professional manufacturers and carefully inspected when purchasing to avoid problems during use.

When using a laser cutting machine, the cutting head will follow the set cutting trajectory. However, in different materials, thicknesses, and cutting methods, it is necessary to adjust and control the height of the laser cutting head. The distance between the cutting nozzle and the workpiece surface is one of the factors that determine the cutting quality and cutting speed. In addition to selecting the appropriate cutting nozzle model and air pressure parameters based on the cutting situation, metal laser cutting machines use different parameters for steel plates of different thicknesses. The height between the cutting head and the steel plate needs to be adjusted according to the thickness of the cutting material, and the cutting nozzle needs to be adjusted to the corresponding height.

In the process of using a metal laser cutting machine, in order to ensure high-quality cutting, the height from the cutting nozzle to the surface of the workpiece to be cut needs to be kept basically the same. Because the speed of the laser cutting machine is very high, the operator can see with their eyes, while the manual adjustment method is not effective, and the reaction speed is definitely not achievable. Especially when cutting thin sheets, or when the material surface has texture, low flatness, or limited cutting and processing environment, it is important to maintain a stable cutting height.

In order to compensate for the instability of height control during manual adjustment cutting, the metal laser cutting machine is equipped with an imported follow-up capacitor height adjuster. No matter how thick the sheet is cut, the capacitor height adjustment can be used to follow the cutting head, and the height can be kept consistent.